After adding the equipment information in SCRAMNET, the next step is to install the SCRAM CAM bracelet on the client’s ankle and assign the equipment for alcohol monitoring.
To complete the installation and assignment process efficiently, there are a few steps you can perform and verify prior to meeting with the client and before installing the bracelet on the client’s ankle.
- Participant Agreement: Print two copies of the agreement. Review the information provided on the Participant agreement form with the client and have them sign both copies. One copy is for your records and the second copy is for the client.
- SCRAM CAM Bracelet: Before installing the SCRAM CAM bracelet on the client’s ankle, you can install the bracelet’s components and faceplate. Do not let the battery sit in the bracelet for more than 24 hours before installing the bracelet on the client’s leg.
 Cleaning Bracelet Battery Contacts (click to enlarge) |
 Battery Installed in Bracelet with Green Light On (click to enlarge) |
 Installing Faceplate on Bracelet (click to enlarge) |
- Base Station: Ensure the base station’s back up battery is fully charged. If the base station was recently received from SCRAM Systems, it is possible there is a clear plastic plug in the Ethernet port. Remove this plug with a pair of needle-nose pliers.
- Direct Connect Application: When using the Direct Connect Application for assignment, ensure the application is installed on your computer before meeting with the client. When installing the Direct Connect application on your computer for the first time, verify which version of the application to install by identifying which Direct Connect tool you will be using.
|
|
|
Supplies (what you will need)
Software
- Access to SCRAMNET
- The Direct Connect Application
Tools
- Direct Connect device
- Torx Screwdriver/faceplate removal tool/Shear cutters/Magnet
Monitoring Equipment
- Bracelet
- Battery faceplate kit
- Base station (Standard/Wireless)
- Power cord
- Ethernet cord
- Telephone cord
If possible, verify the client’s equipment status is displaying Pending Assignment in SCRAMNET before beginning. If the equipment being installed and assigned to the client is not in a pending Assignment status, add the equipment information or contact SCRAM Systems Customer Service for assistance.
SCRAMNET Client’s Equipment Page (click to enlarge)
After verifying the equipment status, the next step is to install the SCRAM CAM bracelet and assign the equipment for alcohol monitoring.