SCRAM Remote Breath

Disinfect and Clean SCRAM Remote Breath Pro Device

SCRAM Systems understands how important it is for you to keep the devices in your available inventory in peak condition. Keeping units on-site and functional saves precious time and money for your monitoring business. To help you keep your SCRAM Remote Breath Pro devices operating at peak performance, SCRAM Systems engineers have researched and developed a series of recommended cleaning and maintenance procedures that enable you to get the most out of your SCRAM devices investment.

To prevent damage to SCRAM equipment, only use the SCRAM-Approved Disinfectant and Cleaner. This is the only cleaner approved by SCRAM Systems.

Do Not Use the Following Types of Cleaners on Your SCRAM Equipment:

·         Alcohol-based

·         Citrus-scented

 ·         Pine-based

·         Aldehyde-based

 ·         Chlorine-based

·         Contains Benzalkonium Chloride

General Information

When handling previously used SCRAM equipment, wear gloves, eye protection, and a face mask before and during the disinfecting process.

Recommended Supply List

  1. SCRAM-Approved Disinfectant and Cleaner
  2. Paper Towels, Microfiber Cloths, or Washcloths
  3. SCRAM Device Cleaning Supplies Kit

Biohazard Disposal

If you feel that a piece of SCRAM Systems equipment may pose a specific health hazard, and you decide it is not worth the risk to clean or reuse the device, please dispose of the device in a sealed plastic bag and refer to the biohazardous or medical waste disposal guidelines in your area for specific disposal instructions.

Important! DO NOT RETURN BIOHAZARDOUS DEVICES TO SCRAM SYSTEMS. Important!

Contact SCRAM Systems Customer Service with the serial number of the device being removed from your inventory.

To Disinfect SCRAM Remote Breath Pro Devices:

Important!
  1. Spray all surfaces with the SCRAM-Approved Disinfectant and Cleaner solution.
Important!
  1. Allow the device to remain wet for 10-15 minutes.
Important!
  1. Wipe surfaces dry with a paper towel or cloth.
Important!
  1. Spray a precision-tip cotton swab or paper towel with the approved disinfectant and cleaner solution and wipe the inside of the device’s breath tube port.
Important!
  1. Dry the inside of the breath tube port with a paper towel or cloth.

 

Tips Tip:
For a printable version of the disinfecting and cleaning instructions, click here.